AEON LABS Z STICK ATTACH SOFTWARE
You may use any Z-Wave Gateway to pair MultiSensor 6, but compatibility and how the sensor shows ultimately depends on the gateway and software integration of products. To pair MultiSensor 6, you are not limited to only the Z-Stick or Minimote. With it powered on, it's now time to add your MultiSensor 6 to a Z-Wave network. Make sure to seat the Battery Cover back onto the MultiSensor 6 and lock it in.Īdding your MultiSensor 6 into a Z-Wave Network. WARNING: Not compatible to rechargeable CR123A batteries (3.7V)ģ. If powering your MultiSensor 6 with a sole battery, insert it into the battery holder marked 1. Note: MultiSensor 6 can be powered by a single CR123A, though batteries will require changing more frequently. Insert two CR123A batteries orientated according to the diagram within your sensor. Remove your sensor's rear cover as shown in the previous step.Ģ. Make sure to seat the Battery Cover back onto the MultiSensor 6 and lock it in.ġ. Insert the larger end of the USB cable into a computer or adapter. Insert the smaller end of the provided USB cable into your sensor's USB port.ģ. Remove the battery cover by sliding the Unlock button and separatingthe two parts of your Sensor.Ģ. These steps can be performed in any location within your home, and not necessarily in your MultiSensor 6's final installation location.ġ. For this, you'll need an adapter to plug your USB cable into this can include any computer USB port and most smartphone chargers. For the purposes of installation and setup, even if you intend to power your sensor with batteries, we recommend using the provided USB cable for setup. MultiSensor 6 can be powered by battery or by USB with an appropriate adapter.
0 kommentar(er)
